SM-105 PORTABLE MAGNETIC SUSCEPTIBILITY METER

having a pick-up coil for measurement of one inch cores or fragments

GENERAL

The SM-105 Portable Magnetic Susceptibility Meter is designed for laboratory or field use to measure bulk susceptibility of standard 25,4 mm cores. Small sample fragments can be measured in the pot with inner volume 25 cm³. The SM-105 design reflects the latest in electronic advances and offers unrivalled features:

single integrated housing incorporating the measurement zone, the electronics and power supply connected to PC
simple operation without any control knobs.

Operation of the SM-105 is straightforward. Typically a small sample in a plastic vessel is placed into the measuring coil for analysis which is carried out under instructions from a personal computer. The SM-105 is connected to a PC with a cable to serial RS232 port. Results are available in several seconds and are conventionally stored and displayed on this PC. Flexibility and user friendliness have been the key criteria in the design of the SM-105 software.

Calibration samples are supplied. Checking the calibration takes only a few minutes.

FEATURES

HIGH SENSITIVITY 1 x 10^-6 SI UNITS
MEASUREMENT NOT SENSITIVE TO SPECIMEN SHAPE
BATTERY OPERATED
SINGLE INTEGRATED HOUSING CONNECTED TO PC

WARRANTY

We focus on providing 48 hours turnaround support and warranty repair service for the instrument sent back from any location worldwide.

TO ORDER

SM-105 PORTABLE MAGNETIC SUSCEPTIBILITY METER comprising:

1x SM-105 Unit
1x Set Specimen Vessels
1x SM100 Software Package
1x Calibration Standard
1x Set Interconnecting Cables
1x Instruction Manual
1x External Power Unit
1x Accumulator 12V

SPECIFICATION

SENSITIVITY 1 x 10^-6 SI units

OPERATING FREQUENCIES 16, 32, 64, 128, 256 or 500 kHz

FIELD INTENSITIES 10, 20, 40, 80, 160, 320 A/m

FIELD HOMOGENEITY < 1%

INNER DIAMETER OF COIL 40mm

CONTROLS PC

MEASUREMENT TIME < 5s

PC INTERFACE RS232C

OPERATING TEMPERATURE -20°C to 50°C

SUPPLY 12V ACCU or mains

DIMENSIONS 90 x 200 mm (diameter x height)

Specifications are a subject to be changed in connection with the instrument’s improvement.

TIVA CANYON TUFF

Tiva canyon tuff